Connect the robot to a Wi-Fi network

To connect the robot to a Wi-Fi network, follow these steps:

1. Connect to your robot as described in Connect to the web-interface.

   To comply with the robot's certification, you must use an Ethernet cable to avoid simultaneously active radio transmitters while setting up the connection to the local Wi-Fi network.

2. Go to System > Settings > Wi-Fi, and select Add connection.

3. Select the network you want the robot to be connected to, and fill out the displayed fields — see the guide How to connect a MiR robot to a Wi-Fi network for more information about the Wi-Fi settings. You can find this guide on MiR Support Portal.

4. Select Add connection when you have finished.

The robot is now connected to the network. When you are connected to the same network, you can access the robot's interface by entering the IP address displayed under the connection description into your internet browser.